Battery Defpoint 12000 mAh 120A (Samsung 40T 21700)

Name: Battery Defpoint 12000 mAh 120A (Samsung 40T 21700)
Brand: Defpoint
Price: 4900 UAH
Availability: OutOfStock

Product Code: 10840

Brand: Defpoint

Reviews: 0

4 900₴

Reward Points: 98

Pre-Order

Description

Experience maximum power and reliability with Battery Defpoint 12000 mAh 120A (Samsung 40T 21700), designed specifically for FPV drones. This battery will provide your drone with the long-lasting performance and high performance needed for successful flights.

Characteristics

Capacity: 12000mAh
Constant discharge current: 105A
Maximum discharge current: 150A with heating up to 80 degrees
Maximum charge current: 6A
Configuration: 6S3P (3x6)
Cell type: Samsung INR21700-40T3
Voltage: 22.2V (nominal), 25.2V (maximum charged)
Cell size: 21700 (21 mm diameter, 70 mm length)
Power cable: 10AWG, 10cm, silicone - withstands temperatures up to 200 degrees.
Power connector: Amass XT60H-F, material - nylon
Balancing cable: 20AWG, 7cm, silicone - withstands temperatures up to 200 degrees.
Balancing connector: XH2.54 7-pin

Features

High capacity: 12000mAh provides long-lasting drone performance, allowing you to enjoy flying without the need for frequent recharges.
High performance: The maximum discharge current of 150A ensures stable performance even under high loads.
Reliability: Made from quality Samsung INR21700-40T3 cells, this battery has a long life and high resistance to damage.
High build quality: Thanks to careful production control and the use of high-quality components, the battery has increased reliability and resistance to mechanical stress.

Production

First, we select and sort the cells by internal resistance
We glue insulating rings on each battery to prevent short circuits
We mount the batteries in a plastic case for durability and protection against short circuits
We weld the cells together using a powerful welding machine. We use a nickel-plated or copper strip with a width of 10 mm and a thickness of 0.2 mm to 0.4 mm as a connection.
The next step is to solder the power cables (10AWG or 12AWG, depending on the current strength of the assembly) with an XT60H-F connector and the balancing cables with an XH2.54 7-pin connector. After soldering, all cables are laid flat along the assembly so that they do not rub against each other and cause a short circuit during battery use.
We insulate all exposed elements and parts of the assembly with a layer of insulating cortex and additionally fasten all elements with reinforced, high-temperature adhesive tape.
After reliable isolation of all internal elements and open contacts, the assembly is packed in two layers in shrink film. We usually use blue or black film, but we can use any other color if necessary.
The last and one of the most important steps is to check the finished assembly and balance all internal elements to the same value of 3.7 volts. If necessary, we can charge the assembly to 100% for further use.

Information

We deliver orders all over the country using Nova Poshta. The delivery time depends on the time of ordering and the availability of goods.

If your order is confirmed before 16:00 and all the goods are in stock, it will be sent the same day (except Sunday) and delivered by the delivery service within 1-2 days.

If your order is confirmed after 16:00 and all the goods are in stock, it will be shipped the next day.

If this product is not currently in stock, we try to move it to our warehouse as soon as possible, the approximate waiting time is 1-2 days, the manager will warn you about the expectations when confirming this order, as soon as we receive it, it will be delivered by the New Mail service.

Payment methods